|
Input sensitivity/impedance................................................... |
Phono1, 2:
1.2mV/47k Ω
Tuner1, 2: 70mV/150k Ω
AUX1: 0 - 70mV adjustment possibility /70k Ω
AUX2: 70mV/150k Ω
Tape Head 9.5cm and 19cm: 1.6mV/470k Ω
MIC: 1.4mV/47k Ω |
|
Maximum permissible input (1kHz and distortion factor 0.1%) |
Phono1, 2:
400mV
Tuner1, 2: 50V
AUX1, 2: 50V
Tape Head 9.5cm and 19cm: 500mV
MIC: 400mV |
|
Tape monitor (at the time of rated output)............................ |
Rec Out:
70mV/500 Ω
Playback: 70mV/150k Ω
Rec/Play (DIN): 70mV/90k Ω, 150k Ω |
|
Installed capacity................................................................... |
15V/500 Ω |
|
Signal-noise ratio (IHF and A network)................................... |
| |
Input short circuit |
Input opening |
|
Phono1, 2: |
Above 64dB |
Above 58dB |
|
Tuner1, 2: |
Above 75dB |
Above 70dB |
|
AUX1, 2: |
Above 75dB |
Above 70dB |
|
Tape Head 9.5cm: |
Above 63dB |
Above 50dB |
|
19cm: |
Above 63dB |
Above 51dB |
|
MIC: |
Above 63dB |
Above 55dB |
|
|
Total height harmonic wave distortion factor (1kHz)............. |
0.1% or less |
|
Frequency characteristic....................................................... |
Phono1, 2:
Within deviation ±0.3dB from RIAA standard curve
Tuner1, 2: 5Hz - 50kHz and ±0.5dB
AUX1, 2: 5Hz - 50kHz and ±0.5dB
Tape Head 9.5cm:
19cm: |
Deviation
±0.5dB from NAB9.5cm curve (adjustment possibility)
Deviation ±0.5dB from of NAB curve 19cm |
MIC: 10Hz - 50kHz, +0 -1dB |
|
Use semiconductor................................................................ |
Vacuum tube:
12AX7×8 and 6X4×1
Transistor: 1
Diode: 4 |
| Power source........................................................................ |
AC100V and 50/60Hz |
|
Electric power consumption................................................. |
35VA |
|
External size........................................................................ |
Width 420× height 150× depth
250mm |
| Weight.................................................................................. |
7.6kg |
