AUDIO SECTION
IHF Dynamic Power 2 OHMS...................................................
|
305 W |
4 OHMS...................................................................................... |
300 W |
8 OHMS...................................................................................... |
180 W |
POWER OUTPUT PER CHANNEL
DIN 4 OHMS........................ |
190 W |
DIN 8 OHMS AT 1 kHz................................................................ |
140 W |
FTC 8 OHMS (20 Hz - 20
kHz THD 0.03%) .................................... |
100 W |
TOTAL HARMONIC DISTORTION
AT RMS 8 OHMS..................... |
0 015% |
I.M. DISTORTION........................................................................ |
0 015% |
DAMPING FACTOR 8 OHMS (1
kHz)............................................ |
100 |
MMCARTRIDGE INPUT
Frequency Response (IEC RIAA) ......... |
+0.25 dB |
Signal-to-Noise Ratio
(IEC A weighted) .................................... |
90 dB |
Input Impedance
...................................................................... |
47 k ohms |
Input Capacitance..................................................................... |
200 pF |
Input Sensitivity........................................................................ |
2.5 mV |
Equivalent Input Noise.............................................................. |
0.22 MV |
Dynamic Range......................................................................... |
116 dB |
MCCARTRIDGE INPUT
input sensivity...................................... |
100 (Low MO/250 (High
MC) uV |
Input impedance...................................................................... |
3 (Low MO/40 (High MC)
ohms |
CD-TUNER-TAPE INPUT
Input Impedance ........................... |
30 k ohms |
Input Sensitivity......................................................................... |
150 mV |
Frequency Response +1.0
dB .................................................... |
15 Hz ~ 70 kHz |
Signal to Noise Ratio
(IEC A weighted)..................................... |
98 dB |
OUTPUT VOLTAGE Tape
Out [7.75 mV PHONO (MM) Input] |
465 mV |
OUTPUT IMPEDANCE
Tape out (source PHONO)..................... |
220 ohms |
General
E version................................................................................. |
... 110/120/220/240
V AC 50/60 Hz |
Power Consumption at
Rated Output, both Channels Operating |
.....490 W |
Dimensions
Width..................................................................................
|
416 mm |
Hight................................................................................... |
146 mm |
|
410 mm |
Weight................................................................................ |
18.0 kg |