Accuphase E-206

Spec

Accuphase E206

CONTINUOUS AVERAGE POWER OUTPUT 140 watts per channel into 4 ohms 100 watts per channel into 8 ohms (Both channels drive. 20 to 20.000Hz. THD 0.02%)

TOTAL HARMONIC DISTORTION

0.02% max..at 4 ohms

0.01% max..at 6 ohms (Both channels drivo. irom 0,25W to rated continuous average output, 20 to 20.000 Hz)

INTERMOOULATION DISTORTION Will not exeed 0,01% at rated power output

FREQUENCY RESPONSE High Level Input: 20- 20.000Hz +0. -0.2d8 (for rated output) 05 -l20.000Hz:+0. -3.0dB (for 1 watt Output)

Low Level Input: 20-20.000Hz; +0.2.-0.5d8 (for rated output)

DAMPING FACTOR 90.8-ohm load at 50Hz

INPUT SENSITIVITY AND IMPEDANCE

	................Sens	ivity................
Input terminal	Al rated output	ElA at 1w output	Impedance
AD input (MC)	0,11mV	0,01mV	100 ohms
AD input (MM)	3,9mV	0,39 mV	47 kohms
High level input	1,13 mV	1,13 mV	20 kohms

MAXIMUM AD INPUT LEVEL

MM: 300 mVrms, 1kHz. THD 0005% (REC (XJTJ

MC: 8.0 mVrms. 1kHz. THD 0.005% (RCC OUT)

OUTPUT LEVEL AND IMPEDANCE

TAPE REC OUTPUT: 89.8mV. 220 ohms ((rom AD)

HEADPHONES: 0.2V with low Impedance (4-l00 ohms)

GAIN HIGH LEVEL INPUT - OUTPUT: 48 dB

AD INPUT (MM) - TAPE REC OUTPUT: 29 dB

AD INTPUT(MC) — TAPE REC OUTPUT: 60d8

SIGNAL-TO-NOISE RATIO

Input terminal	Input shorted, A-weighted	EIA
High- level input	106 dB	80 dB
AD Input (Mm)	85 dB	79 dB
AD Input (MC)	66 dB	74 dB

PRESENCE EQUALIZER 4-band principle

Frequencies: 100 Hz. 500 Hz. 2 kHz and 8 kHz

Variable Range: ± l0 dB

SUBSONIC FILTER 17H2, -12 dB/oct

ATTENUATOR -20 dB

OUTPUT LOAD IMPEOANCE 4 to16ohms

SEMICONDUCTOR COMPLEMENT 63 Tr's 17 IC's 24 FET'S 80 Di's

POWER REQUIREMENT 100, 117V/220. 240V 50/60Hz AC

CONSUMPTION: 55 watts al zero signal output 330 watts in accordance with IEC-65

DIMENSIONS: 445mm (17-1/2 inches) width. 145mm (5-12/16 inches) max. height*. 370mm (14 9/16 inches) depth

WEIGHT: 17 1kg (37.6 1b) net. 21.2kg (46.6 lb) .n shipping ca/lon

Särskilda egenskaper