Musical Fidelity B1
Spec
|
Musical Fidelity B1 Power 35 watts per channel Inputs and Sensitivity Phono MC 350uVPhono MM 4mVCD 200mVTuner 200mVCDV 200mVTape 1 200mVTape 2 200mVTotal Harmonic Distortion Less than 0.5% Signal-to-Noise Ratio Phono MC -55dBPhono MM -60dBLine inputs -80dBPeak Output Current +45 amps Power Consumption 200 watts peak
|
Special quality´s
The Bl is designed for high definition performance and is capable of sound reproduction comparable in quality to that of true 'exotica' although its power is not as great.
PHONO
The Bl can have one turntable plugged into it at a time, with either a moving coil or moving magnet cartridge. The push button by the phono input selects the high gain (MC) or low gain (MM) mode.
TAPE DUBBING
The Bl has an output specially for tape dubbing. This is labelled Output to Tape 2 on the back panel. There is a switch marked similarly on the front. This selects which input goes to the output. It is possible to listen to one source and record another, at the same time.
HEADPHONE SOCKET
Use of the headphone socket will automatically cut the output to the loudspeakers when a headphone plug is pushed in.
