Technics SA-5200

Spec

               Technics SA-5200

Music power (IHF).............................................46W (4 Ω)  37W (8 Ω)

Effective output (IHF) ........................................16W/16W (4 Ω)
14W/14W (8 Ω)  7Hz - 30kHz +1 -3dB

Frequency characteristic...................................10Hz - 50kHz +1 -3dB

Total height harmonic wave distortion factor.......... 0.8%

Cross modulation distortion factor (60Hz: 7kHz = 4: 1, at the time of effective output) 1.0% Signal-noise ratio (IHF) Phono:........................ 70dB

Damping factor ...................................................30 or more (at the time of 8 Ω load)

              Input sensitivity/impedance

Phono: .................................................................3mV/47k Ω

                         Tape monitor

Rec Out:................................................................ 200mV
Playback:......................................................... .....200mV/30k Ω

                        Tone control

Bass:...................................................................... 50Hz, +10 -12dB
Treble: ...................................................................10kHz and ±10dB

Loudness control.................................................... 50Hz, +12dB  10kHz, +5dB

                        FM section 

Reception frequency................................................ 76MHz - 90MHz

Sensitivity (IHF)........................................................ 1.9 μ V

Selectivity (IHF)........................................................ 60dB

Signal-noise ratio (IHF)............................................. 65dB

Capturing ratio .........................................................2.0dB

Image disturbance ratio............................................ 40dB

IF disturbance ratio................................................... 85dB

AM oppressing ratio ..................................................45dB

Stereo separation...................................................... 35dB

Total height harmonic wave distortion factor ............0.4%

                      Synthesis

               Use semiconductor

 IC: ...........................................................1
FET:......................................................... 1
Transistor:................................................. 38
Diode:....................................................... 19

Power source AC.......................................100V and 50/60Hz

Electric power consumption ........................52W

External size .........................Width 410× height 135× depth 358mm Weight 8kg

 

Särskilda egenskaper

© Loudandproud hifigoteborg